HOURS
Monday-Friday: 7AM-5PM (CST)
The Angle Rod version is suited for smaller systems and is made in stainless steel. It accepts flow in both directions and is suited for all common refrigerants. For HFC/HFO’s you need to pick an over sized sensor to keep down pressure loss.
The sensor comes with reductions to compensate for a restricted flow area as standard. The sensor is made in stainless steel and can be butt welded (TIG) or brazed into the system. The sensor element can be removed and cleaned if necessary. The sensor is available from 1/4" to 1" pipe size.
Product Features:
Weight | 4.200000 |
---|---|
Condition | New |
Manufacturer | HB Products |
Direct Valve Control | None |
Pipe Size | 3/4" |
Material | Stainless Steel |
Refrigerant Gases | CO2 |
System Design | DX Systems |
Analog Output | 4-20 mA / 0-10 V |
Current Consumption | 600 mA with heater |
VAC | 24V AC/DC |
Electrical Connection | DIN Plug or M12, 3p |
Vibrations | IEC 68-2-6 (4g) |
House Design | Front Housing |
Control cable size [mm2] | 3 x 0.75 mm2 |
Cable glands | PG7 / M8 |
EMC Test | EN 61000-2 |
Refrigerant Temperature | -67°/122°F (-55°/50°C) |
Length | 4.7" |
Width | 15" |
Height | 20.1" |