4623-81 Nu-Calgon NU-PLUS EV FOUNTAIN CARTRIDGE

Nu-Plus EV Fountain is a cost-conscious, high-flow water filtration cartridge for food service applications, built to fit existing Everpure® OEM manifolds. It's designed as an easy, reliable way to replace worn-out high-flow cartridges without replacing the entire filtration system.

How It Works

The cartridge uses carbon media for chlorine taste and odor reduction along with 0.5 micron filtration for sediment, cyst, and microplastic reduction.

NSF International tested and certified against NSF/ANSI Standard 42 (chlorine, taste, odor, Class I particulate), Standard 53 (cyst reduction), and Standard 401 (microplastics).

Compatibility

Cross-referenced to replace Everpure® MC2 and XC2 cartridges.

Fits existing OEM manifolds — the manifold/housing itself is not included; this is a cartridge-only replacement.

Suitable for soda fountain and drinking water applications.

Installation

Shut off the incoming cold water line.

Remove the cap from the top of the old filter, exposing the O-rings.

Apply a light coat of food-grade lubricant to the O-rings on the new cartridge as needed.

Insert the cartridge with the label facing left and turn to the right to lock it in.

For twin or triple manifolds, repeat for each cartridge, then flush with 5 gallons of water before use.

Technical Specifications

Product: Nu-Plus EV Fountain

UPC: 681001002363

Micron Rating: 0.5

Rated Capacity: 17,500 gallons (66,244 liters)

Maximum Service Flow Rate: 1.67 gpm (6.32 lpm)

Operating Pressure: 25–125 psi (0.7–8.6 bar)

Operating Temperature: 35–100°F (2–38°C)

Dimensions: 14.75" x 4" (37.5cm x 10.1cm)

Certifications: NSF/ANSI Standard 42, 53, 401

Replacement Interval: Every 6 months or sooner