060G3807 Danfoss Sensor AKS 3000 1/4 NPT, 0-200psi

AKS 3000 is a series of absolute transmitters with high-level signal conditioned current output, developed to meet demands in A/C and refrigeration. AKS 3000 utilizes the proved piezoresistive measuring principle, which has been used for decades in Danfoss pressure transmitters.The pressure reference is a sealed gauge. This means that atmospheric pressure variations have no influence on regulating accuracy. A must in accurate low pressure regulation. All materials in contact with the refrigerant and materials for the housing are AISI 316L stainless steel. No soft gaskets, all environmental sealings are made through laser weldings only. AKS 3000 has a 4 – 20 mA output, and is available with spade terminals for EN 175301-803 plug.Features:Designed to meet A/C and refrigeration demands without compromising control accuracy concerning:Tough environmentVibrationShock during operation and transportHumidity and ice formationTemperature variationsCorrosive media like ammonia gases and salt mistConvenient performance4 – 20 mA signal1% typical accuracy0.5% typical linearityPrepared for high pressure refrigerants Bar code for tracing of calibration dataConvenient performanceCompact designMax. working pressure ≥33 barTemperature compensation for suction lineOptimized accuracy at -10 °C and 20 °C for suction line installations, see page 4¼ -18 NPT, G 3⁄8 A, G ½ A or ¼ flare ensures tight pressure connectionAll laser welded AISI 316L stainless steel enclosureNo soft sealsEnclosure: IP65For use in zone 2 explosive atmospheresApplicationFan speed controlHigh pressure controlCompressor capacity controlEvaporator pressure detectionOil pressure control