027X0166 Danfoss, ICAD 600A motor actuator with standard 9.8 ft cables for ICM motorized valve sizes 20, 25 and 32

Danfoss ICAD 600A motor actuator with standard 9.8 ft cables. Used for ICM motorized valve sizes 20, 25 and 32.Actuator types ICAD 600A and 1200A are dedicated for use with ICM motor operated valves. There are only two sizes of ICAD actuators that cover the range of valves from ICM 20 to ICM 150.The ICAD is controlled via a modulating analogue signal (e.g. 4 – 20 mA / 2 – 10 V) or a digital ON /OFF signal. ICAD incorporates an advanced MMI (Man Machine Interface), including continuous display of Opening Degree, which gives the user a very advanced and flexible setup procedure that can meet many different applications.Features:Designed for industrial refrigeration installations.Advanced and high speed Digital Stepper Motor TechnologySeven segment LCD display and three programming keys includedValve opening degree can be observed continuously.Can easily be configured to different applications on-site (change speed, ON / OFF, Fail Safe operation, modulating valve, etc..)Open – Close time: 3 – 45 seconds depending on valve sizeModulating, ON / OFF operation or Neutral zone / 3 point controlMultiple speed selection during operationLogging of old alarmsPassword protectionControl input signal : 4 – 20 mA, 0 – 20 mA, 0 – 10 V, 2 – 10 V. One or two digital inputs.Position feed back : 0 – 20 mA, 4 – 20 mA (ICM)3 Digital ON / OFF feedback•Resolution: 20 micron / step (0.02 mm stroke pr. step)Total steps: 250 – 3650 depending on size•Auto Calibration, Neutral zoneIn the event of a power failure, multiple fail safe options are possible. During power failure, ICM can be selected to: Close ICM, Open ICM, Stay in the same position, as when power failure occursGo to a specific ICM valve opening degreeHermetic magnetic motorEnclosure: IP67 ~ NEMA 6Approvals: CE, UL, CRNConnectors for easy installation and servicingICAD 600A / 1200A ensures an acurate feedback on the valve position.