Close Coupled Pump: Three-Phase - W01 (Rolled Steel) "JP" Type - ODP - NEMA Premium Efficiency
Description:
Presenting a whole new electrical and mechanical design, the new platform of Rolled Steel motors are made to run cooler, last longer and to be easier to install and maintain. The Premium Efficiency motors meet or exceed all NEMA Premium requirements for energy efficiency. Specially designed to meet the NEMA closed couple requirements, these Open Drip Proof (ODP) motors are designed for environments where dirt and moisture are minimal. Design "B" torque and high efficiency design from 143/5T through 254/6T frames. These motors are specifically designed to provide maximum ventilation and heat dissipation.
Features that make a difference:
- New ventilation system for improved thermal performance
- Robust feet design suitable for tougher applications (frames 182/4T and up)
- New and more robust eyebolts design (frames 182/4T and up) plus an additional eyebolt on non-drive end allowing vertical shaft down lifting for frames 213/5T and 254/6T
- Oversized diagonally split aluminum terminal box that exceeds IP55 requirements and is rotatable in 90 degrees increments for flexibility during installation
- Option for internal AEGIS® SGR
- Color coded/numbered leads as standard for easy wiring
- Regreasable ball bearings on 254/6T frame as standard (optional for 182/4T and 213/5T)
- Bearing cap as standard on flanged motors, optional on non-flanged
- Motor frame painting system 500 hours minimum ASTM B117 salt spray test
- Suitable for VFD operation as per NEMA MG1 part 31.4.4.2
Standard Features:
- Rated Output: 1 to 25 HP
- Number of Poles: 2 to 6
- Class F insulation (B temperature rise)
- Frame Sizes: 143/5 to 254/6, JP design
- Double punched base
- Rated voltage: 208-230/460 V
- Frequency: 60 Hz (dual rated 50 Hz 190-220/380-415V)
- IP21 enclosure
- F1 foot mount as standard
- Aluminum NDE endshield
- Cast Iron flanges for improved strength (182/4TC and above), Aluminum on 143/5TC frame
- Internal bolts, giving a clean surface to the motor, avoiding trapping materials and allowing easy paint job after assembly to the load, if required
- Double shielded ball bearings on frames up to 213/5T. Regreasable ball bearings on 254/6T frame
- Standard bearing cap in all frames
- Ambient temperature: -20 °C to +40 °C
- 1040/45 carbon steel shaft
Optional Features:
- Enclosure: ODPAO
- Voltage: 575V, 200/400V and others (no 50Hz rating)
- Regreasable bearings optional on 182/4T and 213/5T
- Double sealed ball bearings
- Drip cover
- Internal Aegis® SGR
- Space heater and thermal protection (thermostats and thermistors)
Applications:
Specially developed line for industrial and commercial pumping applications:
- Water pumping
- Process
- Transfer and circulating pumps
| Weight | 87.000000 |
|---|---|
| Condition | New |
| Brand | WEG |
- Pro Support
- Pro Web Tools
- Pro Rewards